|
ICM Automatic metal-edge filter
 Structure & Working Principle ICM automatic metal-edge filter contains gear motor reducer, housing, cartridge, scraper filter system, PLC controller, draining valve and so on.
The medium to be cleaned is guided into the filter by inlet, passing from inside to the outside, through the cartridge gap. After filtrating the filtered fluid exits the filter housing at the top opposite the inlet connection, the bigger solids are separated on the surface of the triangular cartridge wires. When it runs a certain time, the cartridge gap will be plugged up by impurities, and meanwhile the differential pressure reaches the pre-set, and then PLC inspects signal and sends out the indication. The gear motor drives the scraper, the particles or agglomerates are skimmed from the surface, thereby, keep the function of cartridge well, keep the cartridge gap clean. When the impurities of the bottom of filter increases, just open the drain valve, the impurities will be emptied successfully, and make the system pressure keep normal. Because of reasonable positions and optimum scraping angle of the filter’s scrapers, the rotational scraper drain off the impurities from the filter clearance timely by the gear motor, which avoids the burden of taking down and washing the cartridge, thereby, make the medium being filtered successfully. The scraper system contains stator, PTFE scraper and spring, which are designed for automatic cleaning, and especially for the reasonable spring pressure, maximally reduce the cartridge’s abrasion. |
|
Design Feature
·Using automatic continuous on-line filtration, meet the automation operation request.
·System drives by motor, the gear motor runs against the spring actuated scraper, the concentrated solids are drained off simply by the system, and keep the function of cartridge well .
·PLC control function means differential-pressure cleaning, time preset time cleaning, manual cleaning. The differential-pressure is in priority, and be connected with the central control room.
·Validated by practice, the effect of filtration is very nice, and using the wedge cartridge, easy-cleaned, less abrasion.
·In many fields, this filter can replace the traditional bag filter, basket filter, cartridge filter, vibratory sieve filter, frame filter, strap filter and so on..
Applications
· Industrial cycle water such as iron and steel blast furnace, rolling mill, cast machine, condensate, cooling water
·Water filter such as desalination, river water, surface water.
· Environmental engineering such as the pre-filtration of bag , cartridge, UF,RO membrane etc.
·Paper making industry such as white water, original water, nozzle protection.
·The filtration of central air condition system, Petrochemicals, automobile.
Specifications
|
Model |
A(mm) |
B(mm) |
C(mm) |
D(mm) |
Inlet&Outlet Size |
Discharge Size |
Flow(m3/h) |
Motor Power (KW) |
|
BF-ICM219 |
1500 |
450 |
500 |
219 |
DN50 |
DN25 |
30 |
0.25 |
|
BF-ICM350 |
1530 |
510 |
500 |
350 |
DN100 |
DN25 |
50 |
0.4 |
|
BF-ICM450 |
1800 |
550 |
500 |
450 |
DN150 |
DN50 |
100 |
0.75 |
|
BF-ICM550 |
1900 |
625 |
500 |
550 |
DN200 |
DN50 |
125 |
1.0 |
|
BF-ICM650 |
2000 |
680 |
500 |
650 |
DN250 |
DN50 |
150 |
1.25 |
|
BF-ICM750 |
2200 |
740 |
500 |
750 |
DN300 |
DN50 |
180 |
1.5 | |
Flow instruments
