|
BOOCCA Averaging Pitot tube BF-510 Flow Sensor Flange Connection
As an insertion-type flow meter, it is quickly and easily installed through a small hole drilled into a pipe or duct. As a mechanical device without electronics or moving parts, it doesn’t suffer from electronic drift or physical wear, making it a dependable, repeatable primary element requiring no periodic recalibration. Maintenance may be as simple as inspect and replace as needed.
Application:
BF10-510 flange type with simple configuration, good sealed capability, simple and convenient installation. Esp. suitable for high temperature high pressure steam、 hydrogen 、oxygen and other flammable、explosive media, as well as suitable for large-flux steam 、super pipe diameter round pipe and square pipe gas . Comparing with 500 type, 510 adds inverse supporting seat , boost sensor’s intensity, especially suitable for the first and second hypo wind capacity .
·Accuracy: ±0.5%~1.0%
·Repeatability:±0.05%
·Joint manner: flange and sealed in supporting at two sides
·Instruction: ·Suitable pipe dia.: 38~12000mm
·Standard grade: ANSI2500# 9.9Mpa@482℃ 44Mpa@38℃ in highest
| 
Flow instruments
