|
BOOCCA Averaging Pitot tube BF10-400 Flow Sensor Flange Connection On-line Installation type
As an insertion-type flow meter, it is quickly and easily installed through a small hole drilled into a pipe or duct. As a mechanical device without electronics or moving parts, it doesn’t suffer from electronic drift or physical wear, making it a dependable, repeatable primary element requiring no periodic recalibration. Maintenance may be as simple as inspect and replace as needed.
The difference between 400 flange online install type and 200 type is that 400 adopt flange joint, have better sealed function. The customer that have high requirement for seal, temperature & pressure can chose this type. Have single pole drive type and double pole drive which used for high pressure. For large diameter such as too small install space, straight pipe long enough or for the cost reason, can chose the online install part insert type.
· Accuracy: ±0.5%~1.0%
· Repeat accuracy: ±0.1%
· Application: Commonly used for wind, water, gas, natural gas etc. measurement.
· Suitable pipe diameter: 25~12000mm.
· Standard Grade: Online installation temperature less than 121℃, pressure less than 2.5Mpa
Single pole Max. ANSI 150# 0.65Mpa@396℃ 1.89Mpa@38℃
· Joint type: Wire press and expand sealed flange joint online install type.
| 
Flow instruments
