|
BOOCCA Averaging Pitot tube BF-110 Flow Sensor
As an insertion-type flow meter, it is quickly and easily installed through a small hole drilled into a pipe or duct. As a mechanical device without electronics or moving parts, it doesn’t suffer from electronic drift or physical wear, making it a dependable, repeatable primary element requiring no periodic recalibration. Maintenance may be as simple as inspect and replace as needed.
·Accuracy: ±0.5%~1.0%
·Repeat accuracy: ±0.1%
·Joint manner: Double ferrule press and expand sealed in supporting at two sides
·Instruction: 110 Type is the strengthen type of 100 Type, only add a observe supporting seat for use when the flow and pipe diameter is larger, especially suitable for gas (such as wind flow) which pipe diameter not exceed 1800mm
·Application: Normally measure liquid、gas in common temperature、pressure and other non-fatalness gas, liquid
·Suitable pipe dia: 38~1800mm
·Standard grade: ANSI300# 2.9Mpa@396℃ 5.1Mpa@38℃ in highest
| 
Flow instruments
